Kontakt

FAQ
HOME GITAR  BASSGITAR  STUDIO  PA  DJ  VIDEO  SANGEN  TROMMER  FIOLIN  KEYBOARD  CELLO  SAKSOFON  TROMPET  FLψYTE  KLARINETT  BANJO 
River String Samson Sarulean DigiTech sE Electronics Super-Sensitive Hartke Focusrite Novation Shure Allen & Heath Technics HardWire Behringer Denon DJ Pioneer Caymon Black Diamond Tascam

Studio

Studio

K&M
LD Systems
Audac
Mackie
Edirol
Numark
Neumann
Lexicon
AKG
Sojing
TC Electronic
Sennheiser
Soundcraft
Stanton
Yamaha
JBL
Peavey
Crest Audio
Peavey
Martin Audio
Adam Hall
Audio-Technica
Ghost Acoustics
Cakewalk
Steinberg
Eminence
Cherub

International Website

Guitar Lessons
Bass Lessons
Songwriting
Singing Lessons
Piano Lessons
Keyboard Lessons
Recording Courses
Mixing Courses
Drum Lessons
Other Instrument Lessons
Ready to Order?
Prices
Price: 12741.00

5524,00 kr
Price including VAT

Add to basket
Click to Buy


In Stock?:
Delivery time: 2-5 Days
Warranty: Official manufacturer warranty




Product Specifiations

Mic Input Response
• Gain range = 0dB to 60dB in 10dB steps + 20 dB of variable gain
• Input Impedance, variable as follows:-

(Switched Impedance setting Equivalent Input Impedance at 1kHz)

Low = 600 Ohms
ISA110 = 1400 Ohms
Med = 2400 Ohms
High = 6800 Ohms

• EIN (equivalent input noise) = -126dB measured at 60dB of gain with 150 Ohm terminating impedance and 22Hz/22kHz band-pass filter
• Noise at main output with gain at unity (0dB) = -97dBu measured with a 22Hz/22kHz band-pass filter
• Signal to noise ratio relative to max headroom (9dBu) = 106dB
• THD at medium gain (30dB) = 0.0009% measured with a 1kHz -20dBu input signal and with a 22Hz/22kHz band-pass filter
• Frequency response at minimum gain (0dB) = -0.5dB down at 10Hz and -3dB down at 125kHz
• Frequency response at maximum gain (60dB) = -3dB down at 16Hz and -3dB down 118kHz
• CMRR=98dB (Channel 1, 1kHz, maximum gain with +24 dBu input)
• Crosstalk Channel to Channel: with 10dB@1kHz input to chA, chB output =104dBrA. With 10dB@10kHz input to chA, chB output = 84dBrA

Line Input Response
• Gain range = -20dB to +10dB in 10dB steps + 20 dB of variable gain
• Input Impedance = 10kΩ from 10Hz to 200kHz
• Noise at main output with gain at unity (0dB) = -96dBu measured with a 22Hz/22kHz band-pass filter
• Signal to noise ratio relative to max headroom (24dBu)=120dB
• Signal to noise ratio relative to 0dBFS (+22dBu) = 118dB\
• THD at unity gain (0dB) = 0.001% measured with a 0dBu input signal and with a 22Hz/22kHz band-pass filter
• Frequency Response at unity gain (0dB) = -0.3dB down at 10Hz and -3dB down at 200kHz

Instrument Input Response
• Gain range = 10dB to 40dB continuously variable
• Input Impedance:
High = greater than1MΩ
Low =greater than 300kΩ
• Noise at minimum gain (+10dB) = -92dBu measured with a 22Hz/22kHz band-pass filter
• Noise at maximum gain (+40dB) = -62dBu measured with a 22Hz/22kHz band-pass filter
• THD at minimum gain (+10dB) = 0.001% measured with a 10dBu input signal and with a 22Hz/22kHz band-pass filter
• Frequency Response at 10dB gain with -10dB input = 10Hz-100kHz +/- 0.6dB
• Frequency Response at 40dB gain with -40dB input = -2.5dB down at 10Hz and 0dB at 100kHz

High Pass Filter
• Roll off = 18dB per octave 3 pole filter
• Fixed Frequency 75Hz measured at the 3dB down point

Meters
• Moving coil (MC) meter is factory calibrated to 0VU = +4dBu with 1kHz sinewave. With the VU Cal button pressed the meter can be adjusted on the rear panel to allow 0VU to equal +10dBu to +26dBu with the centre detent being equal to +22dBu.
• Peak LED meters calibrated in the detent position for 0dBFS = +22dBu, calibration is adjustable on the rear panel to allow 0dBFS to equal +10dBu to +26dBu
• Routing for MC and Peak1 meter is after the HPF, pre insert send or switched post insert return. Peak2 is always pre ADC channel 2, which can be fed by external input or Instrument input.
• LED levels are as follows when peak calibration is set to center detent on the rear panel. (This is when using the internal ADC).

0 = +22dBu
-2 = +20dBu
-6 = +16dBu
-12 = +10dBu
-18 = +4dBu
-42 = -20dBu

FRONT AND REAR CONNECTIVITY

Analogue Channel Inputs:
• Mic input: XLR x 1
• Line input: XLR x 1 and TRS x1
• Instrument input TRS Jack: XLR x 1
• External ADC input: TRS Jack x 1
• Return: TRS Jack x 1

Analogue Channel Outputs:
• Send: TRS Jack x 1
• Balanced line output: XLR x 1
• DI output: XLR x 1
• DI through: TS Jack x 1

Analogue Channel Additional I/O:
• Cue mix left input: TRS Jack x 1
• Cue mix right input: TRS Jack x 1
• Headphones output: Ό” TRS Jack x 1

Focusrite ISA-One Professional Studio Mikrofon Preamp

:
ISA One features the classic vintage microphone pre-amplifier topology from the original ISA110 module, including the Lundahl L1538 transformer and bespoke zobel network (The original 110 pre amp formed the cornerstone of each channel of Focusrite's legendary Forte console )

The pre amp is complemented by a line input (XLR and TRS Jack) and an independent D
ISA-One
More Pictures (click)
More Focusrite
Question about the ISA-One Professional Studio Mikrofon Preamp? email

Audio, Video & Sounds

:

Related and Similar to ISA-One


Focusrite ISA-One
Professional Studio Mikrofon Preamp

12741.00
5524,00 kr

Focusrite ISA828
8 Channel Professional Studio Mic Preamp

26341.00
18699,00 kr

Focusrite ISA430MKII
Professional Studio Mikrofon Preamp and Compressor

17841.00
19549,00 kr

Focusrite ISA428
4 Channel Professional Studio Mikrofon Preamp

22941.00
13599,00 kr

Focusrite ISA220
Professional Studio Digital Mikrofon Preamp

17841.00
12749,00 kr

Focusrite ISA8-ADC
8 Channel A/D Converter Card for ISA428 or ISA828

5941.00
5091,00 kr


Use of this web site constitutes acceptance of the NO.MusicianUniversity.com User Agreement and Privacy Policy.
Copyright © 2000-2010 NO.MusicianUniversity.com All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the catalog or website. Prices subject to change without notice. .